KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 104

Step 55: Small Roof Assembly
Part 2
B: Place (552) Front Small Roof against (553) Back Small Roof so the tops form a peak then tight to the inside
edge of the outside slats attach 1 Narrow Angle Bracket per slat with 2 (S0) #8 x 7/8" Truss Screws per bracket.
(fig. 55.2 and 55.3)
C: Place Mid Roof Support Assembly on top of Small Roof Assembly so the peaks meet and the roof supports
are flush with the ends and front of the roof panels. Attach with 6 (S11) #8 x 2" Wood Screws. (fig. 55.4)
Fig. 55.2
Wood Parts
1 x Front Small Roof 1-1/4 x 29-3/16 x 21-7/8"
552
1 x Back Small Roof 1-1/4 x 28-15/16 x 21-7/8"
553
553
Fig. 55.4
Flush
S11
Hardware
4 x #8 x 7/8" Truss Screw
S0
6 x #8 x 2" Wood Screw
S11
104
Narrow Angle
Bracket
552
Mid Roof
Support
Assembly
2 x Narrow Angle Bracket
Fig. 55.3
S0
Flush
Other Parts