KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 40

Step 11: Attach Hand Grip/Rail
A: On the left side of the Vertical Rock Wall opening centre 1 Steel Hand Grip then pre-drill with a 1/8" drill bit.
Attach Steel Hand Grip with 2 (WL3) 1/4 x 1-3/8" Wafer Lags (with flat washer). (fig. 11.1 & 11.3)
B: On the right side of the Vertical Rock Wall opening place 1 long Steel Hand Grip so the top is sitting on the
(104) Right Rope and the bottom is sitting on the (0891) Vert Board Short as shown in fig. 11.2. Pre-drill using a
1/8" drill bit and attach using 2 (WL3) 1/4 x 1-3/8" Wafer Lags (with flat washers). (fig. 11.1 & 11.2)
Fig. 11.1
1/4" Flat
Washer
WL3
052
Fig. 11.3
103
Wood Parts
Fig. 11.2
Hardware
4 x 1/4 x 1-3/8" Wafer Lag
WL3
(1/4" flat washer)
40
104
Other Parts
1 x Steel Hand Grip
1 x long Steel Hand Grip