KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 56

Step 20: Upper Crowsnest Assembly
Part 1
A: Loosely attach (201) Crowsnest Top to 2 (202) Upright Crowsnest using 2 (WB9) 5/16 x 2-1/8" Wafer Bolts
(with flat washer and t-nut). The distance between uprights must be 25-1/2". (fig. 20.1)
B: Loosely attach (203) Crowsnest Front to each (202) Upright Crowsnest using 2 (WB9) 5/16 x 2-1/8" Wafer
Bolts (with flat washer and t-nut). The distance between (201) Crownest Top and (203) Crowsnest Front must be
27-5/8" (fig. 20.1)
C: Double check the dimensions then tighten the bolts. It is important these dimensions are met so there are no
issues in future steps.
5/16" Flat
Washer
WB9
Wood Parts
1 x Crowsnest Top 2 x 4 x 29-1/2"
201
2 x Upright Crowsnest 1 x 2 x 34-1/8"
202
1 x Crowsnest Front 2 x 4 x 29-1/2"
203
5/16"
T-Nut
202
WB9
Hardware
4 x 5/16 x 2-1/8" Wafer Bolt
WB9
(5/16" flat washer, 5/16" t-nut)
201
WB9
56
Fig. 20.1
203