KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 106

Step 56: Transom Assembly
Part 1
A: With the notches facing down tap 3 1/4" T-nuts into (561) TB Support then fit (562) Right Upright, (563) Left
Upright and (564) Centre Upright into the grooves so the ends and tops are flush. Attach with 3 (H9) 1/4 x 1-1/4"
Hex Bolts (with lock washer and flat washer). (fig. 56.1)
Fig. 56.1
1/4" T-Nut
Flush
562
Wood Parts
2 x TB Support 1-1/4 x 2-1/2 x 44-1/4"
561
2 x Right Upright 1-1/4 x 3 x 16-1/2"
562
2 x 563 Left Upright 1-1/4 x 4-1/4 x 16-1/2"
2 x Centre Upright 1-1/4 x 3 x 16-1/2"
564
561
H9
6 x
1/4" T-Nut
H9
564
Hardware
1/4 x 1-1/4" Hex Bolt
H9
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
106
1/4" T-Nut
H9
563
Flush
1/4" Flat
Washer
1/4" Lock
Washer