KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 25

Step 4: Join Swing and Slide Wall Assemblies
Part 4
G: On the inside of the assembly attach (021) Narrow Back Panel to (033) Back Rock Panel using 2 Flat Panel
Brackets in the places shown with 4 (S8) #12 x 3/4" Pan Screws per bracket. (fig. 4.9 & 4.10)
H: Repeat Step G to attach (023) Narrow Front Panel to (031) Front Wall Panel. (fig. 4.9 & 4.10)
I: At all four corners on the bottom and the two corners shown on top attach 1 Panel Corner Bracket with 4 (S8)
#12 x 3/4" Pan Screws per bracket. Brackets to be flush to the top and bottom of the panels. (fig. 4.9 & 4.11)
Fig. 4.9
023
Front Wall
021
Back Wall
031
48 x
Inside View
033
Inside View
Hardware
#12 x 3/4" Pan Screw
S8
25
Fig. 4.10
Fig. 4.11
Flush
S8
x 4 per bracket
4 x Flat Panel Bracket
6 x Panel Corner Bracket
Flat Panel
Bracket
x 2 per wall
A
x 4 per
S8
bracket
Panel
Corner
Bracket x 8
Other Parts