KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 82

Step 37: Attach Monkey Ladder and Rail
Assemblies
A: Measure 4-1/2" inches down from the top of the tunnel opening and install (361) Tunnel Support to (021)
Narrow Back Panel using 9 (S11) #8 x 2" Wood Screws.It is important to make sure the (361) Tunnel Support is
flush to the right side of the panel.(fig. 37.1 & 37.2)
Fig. 37.1
Fig. 37.2
Wood Parts
1 x Tunnel Support 1-1/4 x 4-1/2 x 21"
361
361
S11
Hardware
9 x #8 x 2" Wood Screw
S11
82
021
make sure the (361)
Tunnel Support is
flush to the right
side of the panel
4-1/2"