KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 87

Step 41: Attach Pickets
A: From the inside edge of the left (392) Tunnel Post measure 2-1/2" in towards the fort. Place 1 (411) Picket
so it is horizontal to the (343) Tunnel MK Rail Left and (396) Tunnel Rail. Attach using 2 (S3) #8 x 2-1/2" Wood
Screws, making sure that Picket is flush at the top and bottom. (fig. 41.1)
B: Repeat Step A to install 2 more (411) Pickets on the left side, making sure that there is a 2-1/2" space
between each picket. (fig. 41.1)
C: On the right side of the tunnel entrance install 1 (411) Picket to the (342) Tunnel MK Rail Right and (395)
Short Tunnel Rail using 2 (S3) #8 x 2-1/2" Wood Screws. Make sure that Picket is flush at the top and bottom.
(fig. 41.1)
Fig. 41.1
S3
411
S3
Wood Parts
4 x Picket 1-1/2 x 1-1/2 x 33"
411
2-1/2"
396
Hardware
8 x #8 x 2-1/2" Wood Screws
S3
87
395
S3
392
343