KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 80

Step 35: Monkey Ladder Assembly
Part 2
C: At bottom of (351) Tunnel Ladder Rail Right and (352) Tunnel Ladder Rail Left attach (353) Tunnel Ground
with 2 (H5) Hex Bolts (with lock washer, flat washer and t-nut). Be sure to keep the bolts loose. (Fig. 35.3)
D: Make sure the assembly is square and then attach 1 (354) Tunnel Diagonal to each end of (353) Tunnel
Ground with 1 (H3) Hex Bolt (with lock washer, flat washer and t-nut) per diagonal (Fig.) and to each (351) Tunnel
Ladder Rail Right and (352) Tunnel Ladder Rail Left with 1 (H12) Hex Bolt (with lock washer, flat washer and
t-nut) per diagonal (Fig.). Then tighten all bolts from Steps C & D. (Fig. 35.3 & 35.4 & 35.5)
Fig. 35.3
354
353
H5
Fig. 35.4
353
Wood Parts
1 x Tunnel Ground 5/4 x 4 x 72-5/8"
353
2 x Tunnel Diagonal 1-3/8 x 2-1/2 x 53"
354
354
1/4" T-Nut
354
1/4" Flat
Washer
1/4" Lock
Washer
H3
2 x
H3
2 x
H12
2 x
H5
352
Fig. 35.5
354
Hardware
1/4 x 2-1/2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
1/4 x 3" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
1/4 x 4-1/2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
80
351
1/4" T-Nut
351
1/4" Lock
Washer
1/4" Flat
Washer
H12