KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 50

Step 15: Swing Post Assembly
Part 3
F: Place (142) SW Mount flush to the top of (032) SW Wall Panel. Attach with 1 (G5) 5/16 x 4-1/2" Hex Bolt
(with lock washer, flat washer and t-nut) in the bottom hole from outside the assembly and 1 (G5) 5/16 x 4-1/2"
Hex Bolt (with 2 x flat washer and 1 lock nut) in the top hole from inside the assembly. (fig. 15.7 and 15.8)
Fig. 15.7
142
141
G5
Flush
5/16" Flat
5/16" Lock
Washer
Washer
141
5/16" Flat
Washer
2 x
G5
032
5/16"
T-Nut
142
5/16" Lock Nut
Flush
Hardware
5/16 x 4-1/2" Hex Bolt
(1 - 5/16" lock washer, 5/16" flat washer, 5/16" t-nut)
(1 - 5/16" flat washer x 2, 5/16" lock nut)
50
Fig. 15.8
032
G5