KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 24

Step 4: Join Swing and Slide Wall Assemblies
Part 3
E: From inside the assembly, place 1 (044) Tie centred between (021) Narrow Back Panel and (033) Back Rock
Panel so it is flush to the tops of the panels and the angled ends face out then attach with 2 (H10) 1/4 x 2-1/4" Hex
Bolts (with lock washer, flat washer and t-nut) and 2 (S11) #8 x 2" Wood Screws. (fig. 4.7 & 4.8)
F: Repeat Step E to attach 1 (044) Tie to (023) Narrow Front Panel and (031) Front Wall Panel. (fig. 4.7 & 4.8)
Fig. 4.7
Back Wall
021
023
Angled ends
to the outside
Fig. 4.8
Inside View
Wood Parts
2 x Tie 1 x 3 x 24-1/2"
044
033
044
1/4" T-Nut
044
Flush
4 x
H10
4 x
S11
031
1/4" Flat
1/4" Lock
Washer
Washer
S11
H10
Hardware
1/4 x 2-1/4" Hex Bolt (with 1/4" lock washer, 1/4" flat washer and 1/4" t-nut)
#8 x 2" Wood Screw
24