KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 102

Step 54: Attach Gable Dormer to Large Roof
A: On the outside of the Large Roof Assembly on (511) Front Roof Panel, on the 4th siding down, place (541)
Dormer Cleat centred on the panel (over the middle inside slat) then attach with 2 (S11) #8 x 2" Wood Screws.
Make sure the screws go into the siding and the slats. (fig. 54.1 and 54.2)
B: Place completed Gable Dormer Assembly over (541) Dormer Cleat and attach with 2 (S3) #8 x 2-1/2" Wood
Screws (fig. 54.3)
Fig. 54.1
541
Wood Parts
1 x Dormer Cleat 1-1/4 x 3 x 10"
541
Large Roof
Assembly
Fig. 54.3
Gable Dormer
Assembly
4th
Siding
S3
Hardware
2 x #8 x 2" Wood Screw
S11
2 x #8 x 2-1/2" Wood Screw
S3
102
Fig. 54.2
541
S11
Large Roof
Assembly