KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 118

Step 65: Attach Transom Boards
A: Tight to 1 Transom Assembly and flush to the bottom of (551) Mid Roof Support attach 1 (651) Transom
Board A to (551) Mid Roof Support and (641) Long Roof End with 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 65.1
and 65.2)
B: Tight to (651) Transom Board A and flush to the bottom of (551) Mid Roof Support attach 1 (652) Transom
Board B to (551) Mid Roof Support and (641) Long Roof End with 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 65.1
and 65.2)
C: Repeat Steps A and B for the other side.
Transom
Assembly
641
Tight
Fig. 65.2
480
651
Wood Parts
2 x Transom Board A 1 x 5 x 14-1/2"
651
2 x Transom Board B 1 x 5 x 10"
652
551
551
652
S20
x 4 per board
Hardware
16 x #8 x 1-3/8" Wood Screw
S20
118
Fig. 65.1
652
Flush
Transom
Assembly
641
Tight
480
651