KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 83

Step 38: Join Swing and Slide Wall Assemblies
A: With a helper place Tunnel so it is resting on the (361) Tunnel Support as shown in (fig. 38.1)
B: Attach from above using 3 (S20) #8 x1-3/8" Wood Screws. (fig. 38.2 & 38.4)
C: From the underside of the tunnel place 1 bracket to the inside of the (342) Tunnel MK Right Rail and the Main
Clubhouse to connect them. Attach bracket to Main Clubhouse using 3 (S6) #12x1" Pan Screws and attach to the
Tunnel Rail using 1 (WL3) 1/4x1-3/8" Wafer Lag w/ 1/4" Flat Washer.(fig. 38.3 & 38.5)
D: On the outside of the (343) Tunnel MK Left Rail attach a bracket connecting the tunnel to the Main Clubhouse
using 3 (S6) #12x1" Pan Screws and to the Tunnel Rails with 1 (WL3) 1/4x1-3/8" Wafer Lag w/ 1/4" Flat Washer per
bracket. (fig. 38.3 & 38.5)
Fig. 38.2
S20
Bracket
343
Fig. 38.4
Inside View
Fig. 38.1
Fig. 38.3
S20
Hardware
6 x #8 x1-3/8" Wood Screw
S20
2 x 1/4x1-3/8" Wafer Lag w/ 1/4" Flat Washer1/4" t-nut
WL3
6 x #12x1" Pan Screw
S6
83
Bracket
342
361
1/4" Flat
Washer
343
Fig. 38.5
S6
WL3
Other Parts
2 x Brackets