KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 86

Step 40: Attach Tunnel
A: Place entrance assembly against the fort as shown in (fig. 40.1) making sure that the (392) Tunnel Posts are
flush to the bottoms of the (342 and 343) Tunnel MK Rails. (fig. 40.1)
B: Attach the (392) Tunnel Posts to each Tunnel MK Rail using 1 (H11) ¼ x2-3/4" Hex Bolts (with flat washer,
lock washer and t-nut) per side. (fig. 40.1)
C: Attach (395) Short Tunnel Rail and (396) Tunnel Rail to Fort using 2 (S11) #8 x 2" Wood Screws per side.
Note: Screws need to go in on an angle. (fig. 40.1)
Fig. 40.1
S11
343
396
H11
1/4" Lock
Washer
2 x
H11
4 x
S11
395
S11
1/4" Flat
Washer
Hardware
¼ x 2-3/4" Hex Bolts
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
#8 x 2" Wood Screw
86
H11
1/4" Lock
Washer
1/4" Flat
Washer
392