KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 65

Step 23: Crowsnest Wall Assembly
A: Tight to each (202) Upright Crowsnest and tight to the floor and gap boards attach 1 (231) Cedar Wall to each
(211) Crowsnest Bottom Side and (213) Crowsnest Side with 4 (S1) #8 x 1-1/8" Wood Screws per board. (fig.
23.1)
B: Measure 2-1/4" from each (231) Cedar Wall then attach another (231) Cedar Wall per side, tight to the floor
and gap boards using 4 (S1) #8 x 1-1/8" Wood Screws per board. (fig. 23.1)
Fig. 23.1
213
Bevelled edges
facing out.
231
211
S1
x 4 per
board
Wood Parts
4 x Cedar Wall 1 x 4 x 29"
231
202
Tight
Hardware
16 x #8 x 1-1/8" Wood Screw
S1
65
202
213
Tight
231
211