KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 117

Step 64: Attach Long Roof Ends
A: Place 1 (641) Long Roof End tight to each (551) Mid Roof Support and flush to the top of the Transom
Assembly. Make sure (641) Long Roof End is level and the overhang at each end measures 4-1/4", then attach
to (551) Mid Roof Supports with 1 (S3) #8 x 2-1/2" Wood Screw and 1 (S4) #8 x 3" Wood Screw per support and
to each Transom Assembly using 2 (S3) #8 x 2-1/2" Wood Screws per assembly. (fig. 64.1 and 64.2)
Transom
Assembly
4-1/4"
Overhang
641
551
Fig. 64.2
Wood Parts
2 x Long Roof End 1-1/4 x 3 x 16-3/8"
641
390
Fig. 64.1
551
S3
Tight
Hardware
6 x #8 x 2-1/2" Wood Screw
S3
2 x #8 x 3" Wood Screw
S4
117
Transom
Assembly
641
S4
Flush
S3
Transom
Assembly
641