KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 44

Step 12: Door Panel Assembly
Part 4
F: In the notched out opening of (122) Door Stop attach the Magnetic Catch using 2 (S38) #7 x 1-1/8" Pan
Screws. (fig. 12.7) Important: Use a hand held screw driver and DO NOT over tighten.
G: On the inside of the assembly, attach (122) Door Stop to (023) Narrow Front Panel with 3 (S11) #8 x 2" Wood
Screws, making sure (122) Door Stop overhangs (023) Narrow Front Panel by 1-1/4" and is in position to receive
the Catch Plate. (fig. 12.8 and 12.9).
Fig. 12.7
Fig. 12.9
Side View
Wood Parts
1 x Door Stop 5/4 x 3 x 10"
122
122
S38
Magnetic
Catch
S11
122
023
1-1/4"
Hardware
2 x
S38
3 x
S11
Fig. 12.8
Inside View
122
023
#7 x 1-1/8" Pan Screw
#8 x 2" Wood Screw
44
Other Parts
1 x Magnetic Catch