KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 35

Step 8: Vertical Rock Wall Assembly
Part 4
F: In the lower opening place 2 (089) Vertical Rock Board Short A's side by side and tight to Vertical Rock Board
D2. Attach using 6 (S20) #8 x 1-3/8" Wood Screws per board. (Fig 8.9 & 8.7)
G: Tight to (089) Vertical Rock Board Short A place 1 (0890) Vertical Rock Board Short Wide making sure that
the hole is at the bottom. Attach using 6 (S20) #8 x 1-3/8" Wood Screws per board. (Fig 8.9 & 8.7)
H: Repeat Step F to attach 1 (089) Vertical Rock Board Short A and 1 (0891) Vertical Board Short making sure
to attach them in the order shown in (Fig 8.9 & 8.7)
I: Install 1 (S10) #8 x 1" Pan Screw into each Rock in the hole beneath the Pan Bolt. (Fig 8.9 & 8.8)
Note: Make sure all hardware is used to secure each rock properly.
Fig. 8.9
Fig. 8.8
S10
x 1 Per Rock
beneath the
Pan Bolt
Wood Parts
1 x 5/8 x 4-1/4 x 53" - Vert Rock Board Short A
089
1 x 5/8 x 5 x 53" - Vert Rock Board Short Wide
0890
1 x 5/8 x 4-1/4 x 53" - Vert Board Short
0891
089
0890
089
0891
6X #8 x 1-3/8" WS PER BOARD
x 6 Per
S20
Board
Hardware
30 x #8 x 1-3/8" Wood Screw
S20
22 x #8 x 1 Pan Screw
S10
35
Fig. 8.7