KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 34

Step 8: Vertical Rock Wall Assembly
Part 3
Note: It is important to follow board orientation closely.
D: Place (085) Vertical Rock Board A1 directly above (081) Vertical Rock Board A2 making sure that the beveled
edges are at the top and that the boards are tight together and flush to the edge. Attach using 6 (S?) #8 x 1-3/8"
Wood Screws. (Fig 8.5 & 8.6)
E: Tight to (085) Vertical Board A1 attach (086) Vertical Board B1 followed by (087 and 088) Vertical Boards C1
and D1 using 6 (S20) #8 x 1-3/8" Wood Screws per board and making sure that beveled edges are at the top and
that all boards are tight to the bottom boards. (Fig 8.5 & 8.6)
Fig. 8.5
beveled edges
are at the top
085
086
087
088
Flush
081
Wood Parts
1 x 5/8 x 5-1/4 x 40-1/2" - Vert Rock Board A1
085
1 x 5/8 x 5-1/4 x 40-1/2" - Vert Rock Board B1
086
1 x 5/8 x 5-1/4 x 40-1/2" - Vert Rock Board C1
087
1 x 5/8 x 5-1/4 x 40-1/2" - Vert Rock Board D1
088
10X #8 x 1-3/8" WS PER BOARD
S20
x 6 Per
Board
Hardware
24 x #8 x 1-3/8" Wood Screw
S20
34
10X #8 x 1-3/8" WS PER BOARD
Fig. 8.6