KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 121

Step 68: Attach Slides
Note: Pre-drill all holes using a 1/8" drill bit before installing the pan screws.
A: Place Slide centred in the opening of the (031) Front Wall Panel. Slide must be tight to the outside of (031)
Front Wall Panel. (fig. 68.1)
B: Attach slide to fort using 4 (S7) #12 x 2" Pan Screws. (fig. 68.2)
Fig. 68.1
031
Warning!
(051) Front Wall Panel on both sides
Must be tight to
Fig. 68.2
S7
Slide
Hardware
4 x #12 x 2" Pan Screw
S7
121
Warning!
Must be tight to
(051) Front Wall Panel on both sides
Other Parts
1 x Double Ride Maze
N Wave Slide