KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 28

Step 6: Attach Wall Tops
Part 1
A: In the opening of (032) SW Wall Panel, from the inside, attach (061) SW Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2" Wood Screw at each end as shown in (fig. 6.1 & 6.3)
B: Attach (061) SW Wall Top to slat in (032) SW Wall Panel with 1 Corner Bracket using 3 (S37) #7 x 5/8" Pan
Screws. (fig. 6.1 & 6.2)
C: In the opening of (022) Slide End Panel, from the inside, attach (062) Half Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2" Wood Screw at each end as shown in (fig. 6.1 & 6.3)
D: Attach (062) Half Wall Top to slats in (022) Slide End Panel with 2 Corner Bracket using 3 (S37) #7 x 5/8"
Pan Screws per bracket. (fig. 6.1 & 6.2)
Fig. 6.1
022
Fig. 6.2
Inside View
Corner
Bracket
x 3 per
S37
bracket
Wood Parts
1 x SW Wall Top 5/4 x 3 x 33-1/2"
061
1 x Half Wall Top 5/4 x 3 x 33"
062
062
Front Wall
Slat
4 x
9 x
Hardware
S11
#8 x 2" Wood Screw
#7 x 5/8" Pan Screw
S37
28
Fig. 6.3
Inside View
S11
SW Wall
Other Parts
3 x Corner Bracket
x 1 per end
per board
061
032