KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 7

Your Key To Quick Assembly
SORTING WOOD PARTS INTO
EACH ASSEMBLY STEP WILL
SAVE TIME!
SAVE TIME - TIP #1:
Open each box with wood parts and look for the Key Number
stamped on the end of the wood part (see chart below). Sort
each wood part into the different assembly steps.
2X
Part Quantity
Step Number
(This is Step 1)
SAVE TIME - TIP #2:
In addition to the key number stamp, you can also identify
the wood parts by using the Parts Identification pages in the
manual or the Parts Identification weather resistant poster.
HARDWARE:
The majority of each hardware part comes packed in a separate bag
so you do not need to sort the hardware. Each assembly step indicates
which hardware (bolt, screw, washer etc.) you will require to complete
the step.
012
Key Number
01 2 Order Listed
(The order the part is
listed in step 1)
Post
Part Description
Key Number: The first two digits represent the step
number. The third digit represents the order in which
the part is listed in the step.
Note that if the part is used in multiple steps then
the key number only reflects the first step it is used in.
7
Step Step
2 x 4 x 83"
Part Size
Step