KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 42

Step 12: Door Panel Assembly
Part 2
C: On the outside of the (121) Door Window Panel attach the second Door Handle at approximately the same
place as the one on the inside. Use 2 (S37) #7 x 5/8" Pan Screws. (fig. 12.3)
D: Attach 2 Door Hinges on the outside of the (121) Door Window Panel on the opposite side from the Door
Handle. Judge spacing based on (fig. 12.3). Use 3 (S37) #7 x 5/8" Pan Screws per Hinge.
Note: Hinge stops must be tight to (121) Door Window Panel. (fig. 12.4)
Fig. 12.3
S37
121
Outside View
Hardware
8 x
S37
Hinge Stop
Door
Handle
S37
#7 x 5/8" Pan Screw
42
Fig. 12.4
Top View
1/2"
Other Parts
1 x Door Handle
2 x Door Hinge