KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 115

Step 63: Attach Small Roof Assembly
Part 1
A: With 2 people on the ground and at least 1 person in the fort, lift Small Roof Assembly up and over the Back
side of the fort. Guide the Small Roof Assembly onto the fort so the ends of the Small Roof Support Assembly sit
flush to the front and ends of each (621) Roof End Short. The ends of the Mid Roof Support Assembly should be
flush to the ends of the (611) Mid Roof Ends and tight to the Transom Assemblies. (fig. 63.1 and 63.2)
B: Attach Small Roof Assembly to (611) Mid Roof Ends first then (621) Roof End Shorts with 1 (S3) #8 x 2-1/2"
Wood Screw per corner. (fig. 63.2)
Fig. 63.1
Flush
Tight
S3
Flush
611
S3
621
Small Roof
Support
Assembly
Transom
Mid Roof
Assembly
Support
Assembly
621
Flush
Hardware
4 x #8 x 2-1/2" Wood Screw
S3
115
Fig. 63.2
Transom
Assembly
Tight
Flush
611
S3
S3