Connecting To The Usb Interface - YOKOGAWA WT5000 User Manual

2.3

Connecting to the USB Interface

Notes about Connections
• Be sure to insert the USB cable connector firmly into the USB port.
• If you are connecting multiple devices by using a USB hub, connect this instrument to the USB hub
port that is closest to the port that the controller is connected to.
• Do not connect or remove USB cables from the time when this instrument is turned on until
operation becomes available (approximately 20 to 30 seconds). Doing so may damage this
instrument.
IM WT5000-17EN
1
2
3
4
5
6
7
App
Index
2-3