Connecting The Ethernet Interface; When Connecting Only The Recorder And A Pc; When Connecting To A Preexisting Network - YOKOGAWA Vigilantplant mR10000 User Manual

2.2

Connecting the Ethernet Interface

When Connecting Only the Recorder and a PC

When Connecting to a Preexisting Network

2-2
Connect the recorder and the PC via a HUB as in the following figure.
µR10000/µR20000 Recorder
µR10000/µR20000 Recorder
The following figure illustrates an example in which a recorder and a PC are connected
to the network. When connecting the recorder or the PC to a preexisting network, the
transfer rate, connector type, etc. must be matched. For details, consult your system or
network administrator.
µR10000/µR20000 Recorder
Note
• Depending on the reliability of the network or the volume of network traffic, all the transferred
data may not be retrieved by the PC.
• Communication performance deteriorates if multiple PCs access the recorder simultaneously.
10BASE-T
straight cable
Hub
PC
10BASE-T
straight cable
Network
Hub, router, etc.
PC
10BASE-T
straight cable
IM 04P01B01-17E