YOKOGAWA WT5000 User Manual page 41

5.1 List of Commands
Command
[:INPut]:SYNChronize?
[:INPut]:SYNChronize[:ALL]
[:INPut]:SYNChronize:ELEMent<x> Sets or queries the synchronization source of the specified element.
[:INPut]:SYNChronize:{SIGMA|SIG
MB|SIGMC}
[:INPut]:SYNChronize:LEVel?
[:INPut]:SYNChronize:LEVel:{VOL
Tage|CURRent}[:ALL]
[:INPut]:SYNChronize:LEVel:{VOL
Tage|CURRent}:ELEMent<x>
[:INPut]:SYNChronize:RECTifier? Queries all synchronization source rectifier on/off settings.
[:INPut]:SYNChronize:RECTifier:
{VOLTage|CURRent}[:ALL]
[:INPut]:SYNChronize:RECTifier:
{VOLTage|CURRent}:ELEMent<x>
[:INPut]:VOLTage?
[:INPut]:VOLTage:AUTO?
[:INPut]:VOLTage:AUTO[:ALL]
[:INPut]:VOLTage:AUTO:ELEMent
<x>
[:INPut]:VOLTage:AUTO:{SIGMA|SI
GMB|SIGMC}
[:INPut]:VOLTage:CONFig?
[:INPut]:VOLTage:CONFig[:ALL]
[:INPut]:VOLTage:CONFig:ELEMent
<x>
[:INPut]:VOLTage:POJump?
[:INPut]:VOLTage:POJump[:ALL]
[:INPut]:VOLTage:POJump:ELEMent
<x>
[:INPut]:VOLTage:RANGe?
[:INPut]:VOLTage:RANGe[:ALL]
[:INPut]:VOLTage:RANGe:ELEMent
<x>
[:INPut]:VOLTage:RANGe:{SIGMA|S
IGMB|SIGMC}
[:INPut]:WIRing
INTEGrate Group
:INTEGrate?
:INTEGrate:ACAL
:INTEGrate:INDependent
:INTEGrate:MODE
:INTEGrate:QMODe?
:INTEGrate:QMODe[:ALL]
:INTEGrate:QMODe:ELEMent<x>
:INTEGrate:RACTion
:INTEGrate:RESet
:INTEGrate:RTALl:{STARt|END}
:INTEGrate:RTIMe<x>?
:INTEGrate:RTIMe<x>:{STARt|END} Sets or queries the integration start or end time for real-time integration
:INTEGrate:STARt
:INTEGrate:STATe?
5-8
Function
Queries the synchronization sources of all elements.
Collectively sets the synchronization source of all elements.
Collectively sets the synchronization source of all the elements that belong
to the specified wiring unit (ΣA, ΣB, or ΣC).
Queries all synchronization source level settings.
Sets the synchronization source level of the {voltage|current} of all elements
at once.
Sets or queries the synchronization source level of the {voltage|current} of
the specified element.
Sets the synchronization source rectifier on/off setting of the {voltage|current}
of all elements at once.
Sets or queries the synchronization source rectifier on/off setting of the
{voltage|current} of the specified element.
Queries all voltage measurement settings.
Queries the voltage auto range on/off statuses of all elements.
Collectively sets the voltage auto range on/off status of all elements.
Sets or queries the voltage auto range on/off status of the specified element. 5-59
Collectively sets the voltage auto range on/off status of all the elements that
belong to the specified wiring unit (ΣA, ΣB, or ΣC).
Queries the valid voltage ranges of all elements.
Collectively sets the valid voltage range of all elements.
Sets or queries the valid voltage ranges of the specified element.
Queries the jump destination ranges of all elements that are used when a
voltage peak over-range occurs.
Collectively sets the jump destination range of all elements that is used when
a voltage peak over-range occurs.
Sets or queries the jump destination range of the specified element that is
used when a voltage peak over-range occurs.
Queries the voltage ranges of all elements.
Collectively sets the voltage range of all elements.
Sets or queries the voltage range of the specified element.
Collectively sets the voltage range of all the elements that belong to the
specified wiring unit (ΣA, ΣB, or ΣC).
Sets or queries the wiring system.
Queries all integration settings.
Sets or queries the on/off status of integration auto calibration.
Sets or queries the on/off status of independent element integration.
Sets or queries the integration mode.
Queries the electric current modes for electric current integration of all
elements.
Collectively sets the electric current mode for electric current integration of all
elements.
Sets or queries the electric current mode for electric current integration of the
specified element.
Sets or queries the integration resume action that is taken when the power
recovers from a power failure while integration is in progress.
Resets the integrated value.
Collectively sets the integration start or end time of all elements for real-time
integration mode.
Queries the integration start and end times for real-time integration mode.
mode.
Starts integration.
Queries the integration status.
Page
5-58
5-58
5-58
5-58
5-58
5-58
5-58
5-59
5-59
5-59
5-59
5-59
5-59
5-59
5-59
5-59
5-60
5-60
5-60
5-60
5-60
5-60
5-60
5-61
5-61
5-62
5-62
5-62
5-62
5-62
5-62
5-62
5-62
5-62
5-63
5-63
5-63
5-63
5-63
IM WT5000-17EN