YOKOGAWA WT5000 User Manual page 54

:CURSor:TRENd<x>[:STATe]
Function Sets or queries the on/off status of the cursor
display on the trend display.
:CURSor:TRENd<x>[:STATe] {<Boolean>}
Syntax
:CURSor:TRENd<x>:STATe?
<x> = 1 to 4 (trend display group)
:CURSOR:TREND:STATE ON
Example
:CURSOR:TREND:STATE?
-> :CURSOR:TREND1:STATE 1
:CURSor:TRENd<x>:TRACe<x>
Function Sets or queries the target of the specified cursor
on the trend display.
:CURSor:TRENd<x>:TRACe<x> {<NRf>}
Syntax
:CURSor:TRENd<x>:TRACe<x>?
<x> of TRENd<x> = 1 to 4 (trend display group)
<x> of TRACe<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<NRf> = 1 to 16 (T1 to T16)
Example :CURSOR:TREND:TRACE1 1
:CURSOR:TREND:TRACE1?
-> :CURSOR:TREND1:TRACE1 1
:CURSor:TRENd<x>:{X<x>|Y<x>|DY}?
Function Queries the measured value of the specified
cursor on the trend display.
Syntax :CURSor:TRENd<x>:{X<x>|Y<x>|DY}?
<x> of TRENd<x> = 1 to 4 (trend display group)
X<x> = Trend time string of the cursor position
(X1 = D+, X2 = Dx)
Y<x> = Y-axis value of the cursor position
(Y1 = Y+, Y2 = Yx)
DY = Y-axis difference (DY) between the cursors
Example :CURSOR:TREND:X1?
-> "2018/01/01 12:34:56"
:CURSOR:TREND:Y1? -> 78.628E+00
Description If the trend cursor display is not turned on, the
following results will be returned.
For X<x>: "****/**/** **:**:**" will be returned.
For Y<x> and DY: NAN (Not A Number) will be
returned.
:CURSor:WAVE<x>?
Function Queries all waveform display cursor measurement
settings.
Syntax :CURSor:WAVE<x>?
<x> = 1 to 4 (waveform display group)
:CURSor:WAVE<x>:LINKage
Function Sets or queries the on/off status of the cursor
position linkage on the waveform display.
:CURSor:WAVE<x>:LINKage {<Boolean>}
Syntax
:CURSor:WAVE<x>:LINKage?
<x> = 1 to 4 (waveform display group)
:CURSOR:WAVE:LINKAGE OFF
Example
:CURSOR:WAVE:LINKAGE?
-> :CURSOR:WAVE1:LINKAGE 0
IM WT5000-17EN
:CURSor:WAVE<x>:PATH
Function Sets or queries the cursor path on the waveform
display.
:CURSor:WAVE<x>:PATH {MAX|MIN|MID}
Syntax
:CURSor:WAVE<x>:PATH?
<x> = 1 to 4 (waveform display group)
:CURSOR:WAVE:PATH MAX
Example
:CURSOR:WAVE:PATH?
-> :CURSOR:WAVE1:PATH MAX
:CURSor:WAVE<x>:POSition<x>
Function Sets or queries the position of the specified
cursor on the waveform display.
:CURSor:WAVE<x>:POSition<x> {<NRf>}
Syntax
:CURSor:WAVE<x>:POSition<x>?
<x> of WAVE<x> = 1 to 4 (waveform display group)
<x> of POSition<x> = 1, 2 (1 = C1 +, 2 = C2 x)
<NRf> = 0 to 1000
:CURSOR:WAVE:POSITION1 200
Example
:CURSOR:WAVE:POSITION1?
-> :CURSOR:WAVE1:POSITION1 200
:CURSor:WAVE<x>[:STATe]
Function Sets or queries the on/off status of the cursor
display on the waveform display.
:CURSor:WAVE<x>[:STATe] {<Boolean>}
Syntax
:CURSor:WAVE<x>:STATe?
<x> = 1 to 4 (waveform display group)
Example :CURSOR:WAVE:STATE ON
:CURSOR:WAVE:STATE?
-> :CURSOR:WAVE1:STATE 1
:CURSor:WAVE<x>:TRACe<x>
Function Sets or queries the target of the specified cursor
on the waveform display.
Syntax :CURSor:WAVE<x>:TRACe<x> {U<x>|I<x>|
SPEed<x>|TORQue<x>|AUX<x>}
:CURSor:WAVE<x>:TRACe<x>?
<x> of WAVE<x> = 1 to 4 (waveform display group)
<x> of TRACe<x> = 1, 2, (1 = C1 +, 2 = C2 x)
<x> of U<x>, I<x> = 1 to 7 (element)
<x> of SPEed<x>, TORQue<x> = 1 to 4 (motor
number)
<x> of AUX<x> = 1 or 8 (AUX input channel)
:CURSOR:WAVE:TRACE1 U1
Example
:CURSOR:WAVE:TRACE1?
-> :CURSOR:WAVE1:TRACE1 U1
Description • SPEed<x>, TORQue<x>, and AUX<x> can
only be selected on models with the motor
evaluation function 1 (/MTR1) option.
• <x> of {SPEed<x>|TORQue<x>} = 3 to 4
and <x> of AUX<x> = 5 to 8 are valid only on
models with the motor evaluation function 2
(/MTR2) option.
5.5 CURSor Group
1
2
3
4
5
6
7
App
Index
5-21