YOKOGAWA WT5000 User Manual page 141

Appendix 1 Error Messages
Code Message
161 Invalid block data.
168 Block data not allowed.
171 Missing Right
172 Invalid expression.
178 Expression data not allowed.
181 Invalid outside macro definition.
Communication Execution Errors (200 to 299)
Code Message
221 Setting conflict.
222 Data out of range.
223 Too much data.
224 Illegal parameter value.
225 Overflow.
226 Out Of Memory.
241 Hardware missing.
260 Expression error.
270 Macro error.
272 Macro execution error.
273 Illegal macro label.
275 Macro definition too long.
276 Macro recursion error.
277 Macro redefinition not allowed.
278 Macro header not found.
Communication Query Errors (400 to 499)
Code Message
410 Query INTERRUPTED.
420 Query UNTERMINATED.
430 Query DEADLOCKED.
440 Query UNTERMINATED after indefinite
response.
System Communication Errors (300 and 399)
Code Message
300 Communication device-specific error.
399 Fatal error in the communication driver.
App-2
Corrective Action
<Block data> cannot be used.
<Block data> cannot be used.
Equations cannot be used.
Equations cannot be used.
Equations cannot be used.
This instrument does not support the IEEE 488.2 macro
specifications.
Corrective Action
Check settings that are related to each other.
Check the ranges of the settings.
Check data byte lengths.
Check the ranges of the settings.
Keep program messages (including <PMT>) to 1024 bytes
or less in length.
Keep program messages (including <PMT>) to 1024 bytes
or less in length.
Check that the specified options are all installed.
Equations cannot be used.
This instrument does not support the IEEE 488.2 macro
specifications.
This instrument does not support the IEEE 488.2 macro
specifications.
This instrument does not support the IEEE 488.2 macro
specifications.
This instrument does not support the IEEE 488.2 macro
specifications.
This instrument does not support the IEEE 488.2 macro
specifications.
This instrument does not support the IEEE 488.2 macro
specifications.
This instrument does not support the IEEE 488.2 macro
specifications.
Corrective Action
Check the transmission and reception order.
Check the transmission and reception order.
Keep program messages (including <PMT>) to 1024 bytes
or less in length.
Do not write a query after *IDN? or *OPT?.
Corrective Action
Servicing required.
Servicing required.
Page
4-7 and
chapter 5
4-7 and
chapter 5
—
Chapter 5
Chapter 5
—
Page
Chapter 5
Chapter 5
Chapter 5
Chapter 5
4-2
4-2
—
—
—
—
—
—
—
—
—
Page
4-2
4-2
4-2
—
Page
—
—
IM WT5000-17EN