YOKOGAWA WT5000 User Manual page 45

5.1 List of Commands
Command
STORe Group
:STORe?
:STORe:CONDition?
:STORe:COUNt
:STORe:END
:STORe:FILE?
:STORe:FILE:ANAMing
:STORe:FILE:CDIRectory
:STORe:FILE:CONVert?
:STORe:FILE:CONVert:ABORt
:STORe:FILE:CONVert:AUTO
:STORe:FILE:CONVert:EXECute
:STORe:FILE:DRIVe
:STORe:FILE:FREE?
:STORe:FILE:NAME
:STORe:FILE:PATH?
:STORe:INTerval
:STORe:NUMeric?
:STORe:NUMeric:ITEM
:STORe:NUMeric:NORMal?
:STORe:NUMeric[:NORMal]:ALL
:STORe:NUMeric[:NORMal]:{ELEMen
t<x>|SIGMA|SIGMB|SIGMC}
:STORe:NUMeric[:NORMal]:<Functi
on>
:STORe:NUMeric[:NORMal]:MOTor
<x>
:STORe:NUMeric[:NORMal]:PRESet
<x>
:STORe:PAUSe
:STORe:RECord
:STORe:RTIMe?
:STORe:RTIMe:{STARt|END}
:STORe:SASTart
:STORe:SMODe
:STORe:TEVent
SYSTem Group
:SYSTem?
:SYSTem:CLOCk?
:SYSTem:CLOCk:DISPlay
:SYSTem:CLOCk:SNTP?
:SYSTem:CLOCk:SNTP[:EXECute]
:SYSTem:CLOCk:SNTP:GMTTime
:SYSTem:CLOCk:TYPE
:SYSTem:COMMunicate:COMMand
:SYSTem:DATE
:SYSTem:DFLow:FREQuency
:SYSTem:DFLow:MOTor
:SYSTem:DPOint
5-12
Function
Queries all numeric data storage settings.
Sets or queries the storage state.
Sets or queries the storage count.
Stops the storing of numeric data.
Queries all settings related to the saving of the data stored in this instrument
to files.
Sets or queries the auto naming feature for saving stored numeric data to
files.
Changes the directory that stored numeric data is saved to.
Queries all settings related to the conversion of stored numeric data files into
CSV format.
Aborts the conversion of a numeric data file to CSV format.
Sets or queries the on/off status of the automatic conversion of stored
numeric data files to CSV format.
Converts the specified stored numeric data file to CSV format.
Sets the drive that stored numeric data is saved to.
Queries the free space (in bytes) on the drive that the stored numeric data is
saved to.
Sets or queries the name of the file that stored numeric data is saved to.
Queries the absolute path of the directory that the stored numeric data is
saved to.
Sets or queries the storage interval.
Queries all numeric data storage item settings.
Sets or queries the numeric data storage item selection method.
Queries all numeric data storage item settings (for the manual selection
method).
Collectively sets the on/off status of the output of all element functions when
numeric data is stored.
Sets or queries the on/off status of the output of the specified element or
wiring unit ΣA, ΣB, or ΣC when numeric data is stored.
Sets or queries the on/off status of the specified function's output when
numeric data is stored.
Sets or queries the on/off status of the specified motor's output when
numeric data is stored.
Presets the output on/off pattern of the element functions to be used when
numeric data is stored.
Pauses the storing of numeric data.
Starts the storing of numeric data.
Queries the storage start and end times for real-time storage mode.
Sets or queries the storage start or end time for real-time storage mode.
Sets or queries whether numeric data is stored when storage starts.
Sets or queries the storage mode.
Sets or queries the event that the event-synchronized storage mode will
trigger on.
Queries all system settings.
Queries all date/time settings.
Sets or queries the on/off status of the date/time display.
Queries all settings related to using SNTP to set the date and time.
Uses SNTP to set the date and time.
Sets or queries the time difference from Greenwich Mean Time.
Sets or queries the date/time setup method.
Sets or queries the communication command type.
Sets or queries the date.
Sets or queries the frequency data display format when a low frequency (or
no frequency) input is applied.
Sets or queries the motor data display format when no pulse is applied.
Sets or queries the type of decimal point that is used when saving various
data in ASCII format (CSV).
Page
5-86
5-86
5-86
5-86
5-86
5-86
5-86
5-86
5-86
5-86
5-87
5-87
5-87
5-87
5-87
5-87
5-87
5-87
5-87
5-87
5-87
5-88
5-88
5-88
5-88
5-88
5-88
5-88
5-88
5-88
5-89
5-90
5-90
5-90
5-90
5-90
5-90
5-90
5-90
5-90
5-90
5-90
5-91
IM WT5000-17EN