Connecting To The Usb Interface - YOKOGAWA WT310EH User Manual

1.3

Connecting to the USB Interface

Connection Procedure
Connect the cable as shown below.
Notes on Connection
• Be sure to insert the USB cable connectors firmly into the USB ports.
• If you are connecting multiple devices by using a USB hub, connect this instrument to the USB
hub port that is closest to the port that the controller is connected to.
• Do not connect or remove USB cables from the time when this instrument is turned on until
operation becomes available (approximately 20 to 30 seconds). Doing so may damage this
instrument.
• On the WT310E and WT310EH, it is physically impossible to connect a GP-IB cable and a USB
cable at the same time.
IM WT310E-17EN
WT310E/WT310EH WT332E/WT333E
1
2
3
4
5
6
7
8
9
App
Index
1-3