YOKOGAWA WT5000 User Manual page 39

5.1 List of Commands
Command
[:INPut]:CURRent:EXTSensor:CONF
ig?
[:INPut]:CURRent:EXTSensor:CONF
ig[:ALL]
[:INPut]:CURRent:EXTSensor:CONF
ig:ELEMent<x>
[:INPut]:CURRent:EXTSensor:DISP
lay
[:INPut]:CURRent:EXTSensor:POJu
mp?
[:INPut]:CURRent:EXTSensor:POJu
mp[:ALL]
[:INPut]:CURRent:EXTSensor:POJu
mp:ELEMent<x>
[:INPut]:CURRent:POJump?
[:INPut]:CURRent:POJump[:ALL]
[:INPut]:CURRent:POJump:ELEMent
<x>
[:INPut]:CURRent:RANGe?
[:INPut]:CURRent:RANGe[:ALL]
[:INPut]:CURRent:RANGe:ELEMent
<x>
[:INPut]:CURRent:RANGe:{SIGMA|S
IGMB|SIGMC}
[:INPut]:CURRent:SRATio?
[:INPut]:CURRent:SRATio[:ALL]
[:INPut]:CURRent:SRATio:ELEMent
<x>
[:INPut]:CURRent:SRATio:{SIGMA|
SIGMB|SIGMC}
[:INPut]:ESELect
[:INPut]:FILTer?
[:INPut]:FILTer:FREQuency?
[:INPut]:FILTer:FREQuency[:ALL] Collectively sets the frequency filter of all elements.
[:INPut]:FILTer:FREQuency:ELEMe
nt<x>
[:INPut]:FILTer:FREQuency:ADVan
ced
[:INPut]:FILTer:FREQuency:BPFil
ter[:ALL]
[:INPut]:FILTer:FREQuency:BPFil
ter:ELEMent<x>
[:INPut]:FILTer:FREQuency:HPFil
ter?
[:INPut]:FILTer:FREQuency:HPFil
ter[:ALL]
[:INPut]:FILTer:FREQuency:HPFil
ter:ELEMent<x>
[:INPut]:FILTer:FREQuency:LPFil
ter?
[:INPut]:FILTer:FREQuency:LPFil
ter[:ALL]
[:INPut]:FILTer:FREQuency:LPFil
ter:ELEMent<x>
[:INPut]:FILTer:LINE?
[:INPut]:FILTer[:LINE][:ALL]
[:INPut]:FILTer[:LINE]:ELEMent
<x>
[:INPut]:FILTer[:LINE]:AAFilt
er?
5-6
Function
Queries the valid external current sensor ranges of all elements.
Collectively sets the valid external current sensor range of all elements.
Sets or queries the valid external current sensor ranges of the specified
element.
Sets or queries the display mode of the external current sensor range.
Queries the jump destination ranges of all elements that are used when a
current peak over-range occurs.
Collectively sets the jump destination range of all elements that is used when
a current peak over-range occurs.
Sets or queries the jump destination range of the specified element that is
used when a current peak over-range occurs.
Queries the jump destination ranges of all elements that are used when a
current peak over-range occurs.
Collectively sets the jump destination range of all elements that is used when
a current peak over-range occurs.
Sets or queries the jump destination range of the specified element that is
used when a current peak over-range occurs.
Queries the electric current ranges of all elements.
Collectively sets the electric current range of all elements.
Sets or queries the electric current range of the specified element.
Collectively sets the electric current range of all the elements that belong to
the specified wiring unit (ΣA, ΣB, or ΣC).
Queries the external current sensor conversion ratios of all elements.
Collectively sets the external current sensor conversion ratios of all elements. 5-50
Sets or queries the external current sensor conversion ratio of the specified
element.
Collectively sets the external current sensor conversion ratios of all the
elements that belong to the specified wiring unit (ΣA, ΣB, or ΣC).
Sets or queries the element whose measurement range will be set.
Queries all input filter settings.
Queries all frequency filter settings.
Sets or queries the frequency filter of the specified element.
Sets or queries the on/off status of the advance frequency filter settings.
Collectively sets the band-pass filters of all elements. (Advanced settings)
Sets the band-pass filter of the specified element. (Advanced settings)
Queries all high-pass filter settings. (Advanced settings)
Collectively sets the high-pass filters of all elements. (Advanced settings)
Sets or queries the high-pass filter of the specified element. (Advanced
settings)
Queries all low-pass filter settings. (Advanced settings)
Collectively sets the low-pass filters of all elements. (Advanced settings)
Sets or queries the low-pass filter of the specified element. (Advanced
settings)
Queries all line filter setteings.
Collectively sets the line filter of all elements.
Sets or queries the line filter of the specified element.
Queries all anti-aliasing filter settings. (Advanced settings)
Page
5-48
5-48
5-48
5-48
5-49
5-49
5-49
5-49
5-49
5-49
5-49
5-50
5-50
5-50
5-50
5-50
5-50
5-51
5-51
5-51
5-51
5-51
5-51
5-51
5-51
5-52
5-52
5-52
5-52
5-52
5-52
5-53
5-53
5-53
5-53
IM WT5000-17EN