YOKOGAWA WT5000 User Manual page 40

Command
[:INPut]:FILTer[:LINE]:AAFilter
[:ALL]
[:INPut]:FILTer[:LINE]:AAFilter
:ELEMent<x>
[:INPut]:FILTer[:LINE]:ADVanced Sets or queries the on/off status of the advance line filter settings.
[:INPut]:FILTer[:LINE]:DLFilt
er?
[:INPut]:FILTer[:LINE]:DLFilter
:{NORmal|HARMonics}?
[:INPut]:FILTer[:LINE]:DLFilter
:{NORmal|HARMonics}[:ALL]
[:INPut]:FILTer[:LINE]:DLFilter
:{NORmal|HARMonics}:ELEMent<x>
[:INPut]:FILTer[:LINE]:TYPE
[:INPut]:FREQ2?
[:INPut]:FREQ2:HPFilter?
[:INPut]:FREQ2:HPFilter[:ALL]
[:INPut]:FREQ2:HPFilter:ELEMent
<x>
[:INPut]:FREQ2:LEVel?
[:INPut]:FREQ2:LEVel:{VOLTage|C
URRent}[:ALL]
[:INPut]:FREQ2:LEVel:{VOLTage|C
URRent}:ELEMent<x>
[:INPut]:MODUle?
[:INPut]:MTR<x>[:CONFig]
[:INPut]:NULL:CONDition:{SPEed<
x>|TORQue<x>|AUX<x>}
[:INPut]:NULL:CONDition:{U<x>|I
<x>}
[:INPut]:NULL[:STATe]
[:INPut]:NULL:TARGet?
[:INPut]:NULL:TARGet[:MODE]
[:INPut]:NULL:TARGet:{SPEed<x>|
TORQue<x>|AUX<x>}
[:INPut]:NULL:TARGet:{U<x>|I
<x>}
[:INPut]:NULL:TARGet:{UALL|IA
LL}
[:INPut]:POVer?
[:INPut]:RLINkage
[:INPut]:SCALing?
[:INPut]:SCALing:CTPReset?
[:INPut]:SCALing:CTPReset[:ALL] Collectively sets the CT ratio presets of all elements.
[:INPut]:SCALing:CTPReset:ELEMe
nt<x>
[:INPut]:SCALing:CTPReset:{SIGM
A|SIGMB|SIGMC}
[:INPut]:SCALing:STATe?
[:INPut]:SCALing[:STATe][:ALL]
[:INPut]:SCALing[:STATe]:ELEMen
t<x>
[:INPut]:SCALing:{VT|CT|SFACt
or}?
[:INPut]:SCALing:{VT|CT|SFACtor}
[:ALL]
[:INPut]:SCALing:{VT|CT|SFACtor
}:ELEMent<x>
[:INPut]:SCALing:{VT|CT|SFACtor
}:{SIGMA|SIGMB|SIGMC}
IM WT5000-17EN
Function
Collectively sets the anti-aliasing filter of all elements. (Advanced settings)
Sets or queries the anti-aliasing filter of the specified element. (Advanced
settings)
Queries all digital line filter settings. (Advanced settings)
Queries all digital line filter settings {Normal|Harmonics}. (Advanced settings) 5-53
Collectively sets the digital line filter {Normal|Harmonics} of all elements.
(Advanced settings)
Sets or queries the digital line filter {Normal|Harmonics} of the specified
element. (Advanced settings)
Sets or queries the line filter type.
Queries all second frequency measurement settings.
Queries all high-pass filter settings (for second frequency measurements).
Collectively sets the high-pass filters (for second frequency measurements)
of all elements.
Sets or queries the high-pass filter (for second frequency measurements) of
the specified element.
Queries all second frequency measurement level settings.
Collectively sets the second frequency measurement levels of all elements
{current|voltage}.
Sets or queries the second frequency measurement level of the specified
element {current|voltage}.
Queries the input element type.
Sets or queries the configuration of MTR1 and MTR2.
Queries the status of the NULL operation of rotating speed, torque, or AUX.
Queries the status of the voltage or current NULL operation of the specified
element.
Sets or queries the on/off status of the NULL feature.
Queries all settings for the target of the NULL feature.
Sets or queries the selection mode for the target of the NULL feature.
Sets or queries the target of the NULL operation (rotating speed, torque, or
AUX).
Sets or queries the target of the voltage or current NULL operation of the
specified element.
Collectively sets the target of the voltage or current NULL operation of all
elements.
Queries the peak over-range information.
Sets or queries the on/off status of the measurement range link by wiring unit
Σ.
Queries all scaling settings.
Queries the CT ratio presets of all elements.
Sets or queries the CT ratio preset of the specified element.
Collectively sets the CT ratio presets of all the elements that belong to the
specified wiring unit (ΣA, ΣB, or ΣB).
Queries the on/off statuses of the scaling of all elements.
Collectively sets the on/off status of the scaling of all elements.
Sets or queries the on/off status of the scaling of the specified element.
Queries the VT ratios, CT ratios, or power coefficients of all elements.
Collectively sets the VT ratio, CT ratio, or power coefficient of all elements.
Sets or queries the VT ratio, CT ratio, or power coefficient of the specified
element.
Collectively sets the VT ratio, CT ratio, or power coefficient of all the
elements that belong to the specified wiring unit (ΣA, ΣB, or ΣC).
5.1 List of Commands
Page
5-53
5-53
5-53
5-53
5-54
5-54
5-54
5-54
5-54
5-54
5-54
5-55
5-55
5-55
5-55
5-55
5-55
5-55
5-56
5-56
5-56
5-56
5-56
5-56
5-56
5-57
5-57
5-57
5-57
5-57
5-57
5-57
5-57
5-57
5-57
5-57
5-57
5-58
5-7
1
2
3
4
5
6
7
App
Index