2.3
Connecting to the USB Interface
Notes about Connections
• Be sure to insert the USB cable connector firmly into the USB port.
• If you are connecting multiple devices by using a USB hub, connect the WT1800 to the USB hub
port that is closest to the port that the controller is connected to.
• Do not connect or remove USB cables from the time when the WT1800 is turned on until
operation becomes available (approximately 20 to 30 seconds). Doing so may damage the
WT1800.
IM WT1801-17EN
1
2
3
4
5
6
App
Index
2-3