YOKOGAWA WT5000 User Manual page 93

5.11 INPut Group
[:INPut]:VOLTage:CONFig:ELEMent<x>
Function Sets or queries the valid voltage ranges of the
specified element.
[:INPut]:VOLTage:CONFig:
Syntax
ELEMent<x> {ALL|<Voltage>
[,<Voltage>][,<Voltage>]...}
[:INPut]:VOLTage:CONFig:ELEMent<x>?
<x> = 1 to 7 (element)
ALL = All ranges are valid.
<Voltage> = See [:INPut]:VOLTage:CONFig[:ALL]
Example :INPUT:VOLTAGE:CONFIG:ELEMENT1 ALL
:INPUT:VOLTAGE:CONFIG:ELEMENT1?
-> :INPUT:VOLTAGE:CONFIG:
ELEMENT1 ALL
:INPUT:VOLTAGE:CONFIG:ELEMENT1 1000,
300,100,30,10
:INPUT:VOLTAGE:CONFIG:ELEMENT1?
-> :INPUT:VOLTAGE:CONFIG:
ELEMENT 11.0000E+03,300.0E+00,
100.0E+00,30.0E+00,10.0E+00
Description In the parameters, list all the voltage ranges that
you want to enable. To enable all the ranges,
specify the parameter "ALL."
[:INPut]:VOLTage:POJump?
Function Queries the jump destination ranges of all
elements that are used when a voltage peak
over-range occurs.
[:INPut]:VOLTage:POJump?
Syntax
[:INPut]:VOLTage:POJump[:ALL]
Function Collectively sets the jump destination range of all
elements that is used when a voltage peak over-
range occurs.
[:INPut]:VOLTage:POJump[:ALL] {OFF|
Syntax
<Voltage>}
OFF = No jump destination voltage range
• When the crest factor is set to 3:
<Voltage> = 1.5 V, 3 V, 6 V, 10 V, 15 V, 30 V,
• When the crest factor is set to 6 or 6A:
<Voltage> = 0.75 V, 1.5 V, 3 V, 5 V, 7.5 V, 15 V,
Example :INPUT:VOLTAGE:POJUMP:ALL OFF
5-60
60 V, 100 V, 150 V, 300 V, 600 V,
1000 V
30 V, 50 V, 75 V, 150 V, 300 V,
500 V
[:INPut]:VOLTage:POJump:ELEMent<x>
Function Sets or queries the jump destination range of the
specified element that is used when a voltage
peak over-range occurs.
[:INPut]:VOLTage:POJump:
Syntax
ELEMent<x> {OFF|<Voltage>}
[:INPut]:VOLTage:POJump:ELEMent<x>?
<x> = 1 to 7 (element)
OFF = No jump destination voltage range
<Voltage> = See [:INPut]:VOLTage:POJump[:ALL]
Example :INPUT:VOLTAGE:POJUMP:ELEMENT1 1000V
:INPUT:VOLTAGE:POJUMP:ELEMENT1?
-> :INPUT:VOLTAGE:POJUMP:
ELEMENT1 1.0000E+03
[:INPut]:VOLTage:RANGe?
Function Queries the voltage ranges of all elements.
[:INPut]:VOLTage:RANGe?
Syntax
[:INPut]:VOLTage:RANGe[:ALL]
Function Collectively sets the voltage range of all elements.
[:INPut]:VOLTage:
Syntax
RANGe[:ALL] {<Voltage>}
• When the crest factor is set to 3:
<Voltage> = 1.5 V, 3 V, 6 V, 10 V, 15 V, 30 V,
• When the crest factor is set to 6 or 6A:
<Voltage> = 0.75 V, 1.5 V, 3 V, 5 V, 7.5 V, 15 V,
:INPUT:VOLTAGE:RANGE:ALL 1000V
Example
[:INPut]:VOLTage:RANGe:ELEMent<x>
Function Sets or queries the voltage range of the specified
element.
[:INPut]:VOLTage:RANGe:
Syntax
ELEMent<x> {<Voltage>}
[:INPut]:VOLTage:RANGe:ELEMent<x>?
<x> = 1 to 7 (element)
<Voltage> = See [:INPut]:VOLTage:RANGe[:ALL]
:INPUT:VOLTAGE:RANGE:ELEMENT1 1000V
Example
:INPUT:VOLTAGE:RANGE:ELEMENT1?
-> :INPUT:VOLTAGE:RANGE:
ELEMENT1 1.000E+03
60 V, 100 V, 150 V, 300 V, 600 V,
1000 V
30 V, 50 V, 75 V, 150 V, 300 V,
500 V
IM WT5000-17EN