YOKOGAWA WT5000 User Manual page 47

5.1 List of Commands
Command
Common Command Group
*CAL?
*CLS
*ESE
*ESR?
*IDN?
*OPC
*OPC?
*OPT?
*RST
*SRE
*STB?
*TRG
*TST?
*WAI
5-14
Function
Executes zero calibration (zero-level compensation, the same operation as
pressing CAL or Misc—Cal [Execute] button) and queries the result.
Clears the standard event register, extended event register, and error queue. 5-96
Sets or queries the standard event enable register.
Queries and clears the standard event register.
Queries the instrument model.
Sets bit 0 (the OPC bit) of the standard event register to 1 upon the
completion of the specified overlap command.
Returns ASCII code 1 if the specified overlap command has finished.
Queries the installed options.
Initializes the settings.
Sets or queries the service request enable register.
Queries the status byte register.
Executes single measurement (the same operation as pressing SINGLE or
Misc—Single [Execute] button).
Performs a self-test and queries the result.
Holds the execution of the subsequent command until the completion of the
specified overlap command.
Page
5-96
5-96
5-96
5-96
5-96
5-97
5-97
5-97
5-97
5-97
5-97
5-98
5-98
IM WT5000-17EN