YOKOGAWA WT5000 User Manual page 55

5.5 CURSor Group
:CURSor:WAVE<x>:{X<x>|DX|PERDt|Y<x>|
DY}?
Function Queries the measured value of the specified
cursor on the waveform display.
:CURSor:WAVE<x>:{X<x>|DX|PERDt|Y<x>|
Syntax
DY}?
<x> of WAVE<x> = 1 to 4 (waveform display group)
X<x> = X-axis value of the cursor position
(X1 = X+, X2 = Xx)
DX = X-axis difference (DX) between the cursors
PERDt = Value of 1/DT (1/DX) between the cursors
Y<x> = Y-axis value of the cursor position
(Y1 = Y+, Y2 = Yx)
DY = Y-axis difference (DY) between the cursors
:CURSOR:WAVE:Y1? -> 78.628E+00
Example
Description If the waveform cursor display is not turned on,
NAN (Not A Number) is returned.
5-22
IM WT5000-17EN