YOKOGAWA WT5000 User Manual page 43

5.1 List of Commands
Command
MOTor Group
:MOTor<x>?
:MOTor<x>:EANGle?
:MOTor<x>:EANGle:CORRection?
:MOTor<x>:EANGle:CORRection:AEN
Ter?
:MOTor<x>:EANGle:CORRection:AEN
Ter[:EXECute]
:MOTor<x>:EANGle:CORRection:AEN
Ter:TARGet
:MOTor<x>:EANGle:CORRection:CLE
ar
:MOTor<x>:EANGle:CORRection[:VA
Lue]
:MOTor<x>:EANGle[:STATe]
:MOTor<x>:EANGle:TRIGger
:MOTor<x>:FILTer?
:MOTor<x>:FILTer[:LINE]
:MOTor<x>:FILTer:NOISe:SPEed
:MOTor<x>:FILTer:NOISe:TORQue
:MOTor<x>:PM?
:MOTor<x>:PM:SCALing
:MOTor<x>:PM:UNIT
:MOTor<x>:POLE
:MOTor<x>:SPEed?
:MOTor<x>:SPEed:AUTO
:MOTor<x>:SPEed:LSCale?
:MOTor<x>:SPEed:LSCale:AVALue
:MOTor<x>:SPEed:LSCale:BVALue
:MOTor<x>:SPEed:LSCale:CALCula
te?
:MOTor<x>:SPEed:LSCale:CALCulat
e:{P1X|P1Y|P2X|P2Y}
:MOTor<x>:SPEed:LSCale:CALCulat
e:EXECute
:MOTor<x>:SPEed:PRANge
:MOTor<x>:SPEed:PULSe
:MOTor<x>:SPEed:RANGe
:MOTor<x>:SPEed:SCALing
:MOTor<x>:SPEed:TYPE
:MOTor<x>:SPEed:UNIT
:MOTor<x>:SSPeed
:MOTor<x>:SYNChronize
:MOTor<x>:TORQue?
:MOTor<x>:TORQue:AUTO
:MOTor<x>:TORQue:LSCale?
:MOTor<x>:TORQue:LSCale:AVALue
:MOTor<x>:TORQue:LSCale:BVALue
:MOTor<x>:TORQue:LSCale:CALCula
te?
5-10
Function
Queries all motor evaluation function settings.
Queries all electrical angle measurement settings.
Queries all electrical angle correction settings.
Queries all automatic electrical angle correction entry settings.
Executes an automatic electrical angle correction entry.
Sets or queries the target source for automatically entering the electrical
angle correction value.
Clears the electrical angle correction value.
Sets or queries the electrical angle correction value.
Sets or queries the on/off status of electrical angle measurement.
Sets or queries the trigger of the electrical angle measurement.
Queries all input filter settings.
Sets or queries the line filter.
Sets or queries the noise filter of the revolution signal (pulse input type).
Sets or queries the noise filter of the torque signal (pulse input type).
Queries all motor output (Pm) settings.
Sets or queries the motor output computation scaling factor.
Sets or queries the unit that is added to the motor output computation result. 5-71
Sets or queries the motor's number of poles.
Queries all rotating speed (Speed) settings.
Sets or queries the voltage auto range on/off status of the revolution signal
(analog input type).
Queries all revolution signal (analog input type) linear scaling settings.
Sets or queries the slope (A) of the linear scale of the revolution signal (analog
input type).
Sets or queries the offset (B) of the linear scale of the revolution signal (analog
input type).
Queries all parameter calculation settings for the linear scale of the revolution
signal (analog input type).
Sets or queries the data (Point1X, Point1Y, Point2X, or Point2Y) for
parameter calculations of the linear scale of the revolution signal (analog
input type).
Calculates parameters for the linear scale of the revolution signal (analog
input type).
Sets or queries the range of the revolution signal (pulse input type).
Sets or queries the number of pulses of the revolution signal (pulse input
type).
Sets or queries the voltage range of the revolution signal (analog input type). 5-73
Sets or queries the rotating speed computation scaling factor.
Sets or queries the revolution signal input type.
Sets or queries the unit that is added to the rotating speed computation
result.
Sets or queries the frequency measurement source for the synchronous
speed (SyncSp) computation.
Sets or queries the synchronization source for the rotating speed (Speed)
and torque (Torque) computations.
Queries all torque (Torque) settings.
Sets or queries the voltage auto range on/off status of the torque signal
(analog input type).
Queries all torque signal (analog input type) linear scaling settings.
Sets or queries the slope (A) of the linear scale of the torque signal (analog
input type).
Sets or queries the offset (B) of the linear scale of the torque signal (analog
input type).
Queries all parameter calculation settings for the linear scale of the torque
signal (analog input type).
Page
5-70
5-70
5-70
5-70
5-70
5-70
5-70
5-70
5-70
5-71
5-71
5-71
5-71
5-71
5-71
5-71
5-71
5-72
5-72
5-72
5-72
5-72
5-72
5-72
5-72
5-72
5-73
5-73
5-73
5-73
5-73
5-73
5-74
5-74
5-74
5-74
5-74
5-74
IM WT5000-17EN