YOKOGAWA WT5000 User Manual page 92

[:INPut]:SYNChronize:RECTifier?
Function Queries all synchronization source rectifier on/off
settings.
[:INPut]:SYNChronize:RECTifier?
Syntax
[:INPut]:SYNChronize:RECTifier:{VOLT
age|CURRent}[:ALL]
Function Sets the synchronization source rectifier on/off
setting of the {voltage|current} of all elements at
once.
[:INPut]:SYNChronize:RECTifier:
Syntax
{VOLTage|CURRent}[:ALL] {<Boolean>}
Example :INPUT:SYNCHRONIZE:RECTIFIER:
VOLTAGE:ALL OFF
[:INPut]:SYNChronize:RECTifier:{VOLT
age|CURRent}:ELEMent<x>
Function Sets or queries the synchronization source
rectifier on/off setting of the {voltage|current} of
the specified element.
[:INPut]:SYNChronize:RECTifier:
Syntax
{VOLTage|CURRent}:
ELEMent<x> {<Boolean>}
[:INPut]:SYNChronize:RECTifier:
{VOLTage|CURRent}:ELEMent<x>?
<x> = 1 to 7 (element)
:INPUT:SYNCHRONIZE:RECTIFIER:
Example
VOLTAGE:ELEMNT1 OFF
:INPUT:SYNCHRONIZE:RECTIFIER:
VOLTAGE:ELEMNE1?
-> :INPUT:SYNCHRONIZE:RECTIFIER:
VOLTAGE:ELEMNT1 0
[:INPut]:VOLTage?
Function Queries all voltage measurement settings.
[:INPut]:VOLTage?
Syntax
[:INPut]:VOLTage:AUTO?
Function Queries the voltage auto range on/off statuses of
all elements.
[:INPut]:VOLTage:AUTO?
Syntax
[:INPut]:VOLTage:AUTO[:ALL]
Function Collectively sets the voltage auto range on/off
status of all elements.
Syntax [:INPut]:VOLTage:AUTO[:ALL] {<Boolean>}
:INPUT:VOLTAGE:AUTO:ALL ON
Example
IM WT5000-17EN
[:INPut]:VOLTage:AUTO:ELEMent<x>
Function Sets or queries the voltage auto range on/off
status of the specified element.
[:INPut]:VOLTage:AUTO:
Syntax
ELEMent<x> {<Boolean>}
[:INPut]:VOLTage:AUTO:ELEMent<x>?
<x> = 1 to 7 (element)
:INPUT:VOLTAGE:AUTO:ELEMENT1 ON
Example
:INPUT:VOLTAGE:AUTO:ELEMENT1?
-> :INPUT:VOLTAGE:AUTO:ELEMENT1 1
[:INPut]:VOLTage:AUTO:{SIGMA|SIGMB|S
IGMC}
Function Collectively sets the voltage auto range on/
off status of all the elements that belong to the
specified wiring unit (ΣA, ΣB, or ΣC).
[:INPut]:VOLTage:AUTO:{SIGMA|SIGMB|
Syntax
SIGMC} {<Boolean>}
Example :INPUT:VOLTAGE:AUTO:SIGMA ON
Description SIGMA, SIGMB, or SIGMC is invalid if the wiring
system setting ([:INPut]:WIRing) is made in such
a way that the corresponding wiring unit (ΣA, ΣB,
or ΣC) does not exist.
[:INPut]:VOLTage:CONFig?
Function Queries the valid voltage ranges of all elements.
[:INPut]:VOLTage:CONFig?
Syntax
[:INPut]:VOLTage:CONFig[:ALL]
Function Collectively sets the valid voltage range of all
elements.
Syntax [:INPut]:VOLTage:CONFig[:ALL] {ALL|
<Voltage>[,<Voltage>][,<Voltage>]...}
ALL = All ranges are valid.
• When the crest factor is set to 3:
<Voltage> = 1.5 V, 3 V, 6 V, 10 V, 15 V, 30 V,
60 V, 100 V, 150 V, 300 V, 600 V,
1000 V
• When the crest factor is set to 6 or 6A:
<Voltage> = 0.75 V, 1.5 V, 3 V, 5 V, 7.5 V, 15 V,
30 V, 50 V, 75 V, 150 V, 300 V,
500 V
:INPUT:VOLTAGE:CONFIG:ALL ALL
Example
:INPUT:VOLTAGE:CONFIG:ALL 1000,300,
100,30,10
Description In the parameters, list all the voltage ranges that
you want to enable. To enable all the ranges,
specify the parameter "ALL."
5.11 INPut Group
1
2
3
4
5
6
7
App
Index
5-59