Symbols And Notation Used In This Manual - YOKOGAWA WT5000 User Manual

Symbols and Notation Used in This Manual

Notes and Cautions
The notes and cautions in this manual are categorized using the following symbols.
WARNING
CAUTION
French
AVERTISSEMENT
ATTENTION
Note
Character Notations
Menu Names and Panel Key Names in Bold Characters
Indicate controls such as menu commands, tabs, and buttons that appear on the screen and front
panel keys.
Unit
k: Denotes 1000.
K: Denotes 1024.
Metasyntax
The following table contains the symbols that are used in the syntax discussed mainly in chapters 4
and 5. These symbols are referred to as BNF (Backus-Naur Form) symbols. For details on how to
write data using these symbols, see pages 4-6 and 4-7.
Symbol
<>
{}
|
[]
iv
Calls attention to actions or conditions that could cause serious or fatal injury to
the user, and precautions that can be taken to prevent such occurrences.
Calls attention to actions or conditions that could cause light injury to the user or
damage to the instrument or user's data, and precautions that can be taken to
prevent such occurrences.
Attire l'attention sur des gestes ou des conditions susceptibles
de provoquer des blessures graves (voire mortelles), et sur les
précautions de sécurité pouvant prévenir de tels accidents.
Attire l'attention sur des gestes ou des conditions susceptibles de
provoquer des blessures légères ou d'endommager l'instrument ou les
données de l'utilisateur, et sur les précautions de sécurité susceptibles
de prévenir de tels accidents.
Calls attention to information that is important for proper operation of the
instrument.
Description
A defined value
Select an option in { }
Exclusive OR
Can be omitted
Example: 100 kHz
Example: 720 KB (file size)
Example
ELEMent<x> <x> = 1 to 7
SQFormula {TYPE1|TYPE2|TYPE3}
NUMeric[:NORMal]:VALue?
Example of Input
ELEMENT2
SQFORMULA TYPE1
NUMERIC:VALUE?
IM WT5000-17EN