YOKOGAWA WT5000 User Manual page 94

[:INPut]:VOLTage:RANGe:{SIGMA|SIGMB|
SIGMC}
Function Collectively sets the voltage range of all the
elements that belong to the specified wiring unit
(ΣA, ΣB, or ΣC).
Syntax [:INPut]:VOLTage:RANGe:{SIGMA|SIGMB|
SIGMC} {<Voltage>}
<Voltage> = See [:INPut]:VOLTage:RANGe[:ALL]
:INPUT:VOLTAGE:RANGE:SIGMA 1000V
Example
Description SIGMA, SIGMB, or SIGMC is invalid if the wiring
system setting ([:INPut]:WIRing) is made in such
a way that the corresponding wiring unit (ΣA, ΣB,
or ΣC) does not exist.
[:INPut]:WIRing
Function Sets or queries the wiring system.
[:INPut]:WIRing {(P1W2|P1W3|P3W3|
Syntax
P3W4|V3A3)
[,(P1W2|P1W3|P3W3|P3W4|V3A3)]
[,(P1W2|P1W3|P3W3|P3W4|V3A3)]
[,(P1W2|P1W3|P3W3|P3W4|V3A3)]
[,(P1W2|P1W3|P3W3|P3W4|V3A3)]
[,(P1W2|P1W3|P3W3)][,P1W2]}
[:INPut]:WIRing?
P1W2 = Single-phase, two-wire system [1P2W]
P1W3 = Single-phase, three-wire system [1P3W]
P3W3 = Three-phase, three-wire system [3P3W]
P3W4 = Three-phase, four-wire system [3P4W]
V3A3 = Three-phase, three-wire system with a
three-voltage, three-current method [3P3W(3V3A)]
Example • Example for a 7-element model
:INPUT:WIRING P1W2,P1W2,P1W2,P1W2,
P1W2,P1W2,P1W2
:INPUT:WIRING?
-> :INPUT:WIRING P1W2,P1W2,P1W2,
P1W2,P1W2,P1W2,P1W2
:INPUT:WIRING P1W3,P1W3,P1W3,P1W2
:INPUT:WIRING?
-> :INPUT:WIRING P1W3,P1W3,P1W3,
P1W2
:INPUT:WIRING P1W2,V3A3,V3A3
:INPUT:WIRING?
-> :INPUT:WIRING P1W2,V3A3,V3A3
• Example for a 3-element model
:INPUT:WIRING P1W2,P3W3
:INPUT:WIRING?
-> :INPUT:WIRING P1W2,P3W3
:INPUT:WIRING P3W4
:INPUT:WIRING?
-> :INPUT:WIRING P3W4
Description • Set the wiring system pattern in order starting
from the element with the smallest number.
• Some wiring system patterns are not selectable
depending on the configuration of the installed
input elements. For details on the available
wiring system patterns, see the features guide,
IM WT5000-01EN.
IM WT5000-17EN
5.11 INPut Group
1
2
3
4
5
6
7
App
Index
5-61