Adjustment Operation Area - YASKAWA S-7 Series Command Manual

9.2.3

Adjustment Operation Area

Use the MEM_RD or MEM_WR command to access this area. The address map is given below.
Refer to the following section for the command communications procedure for adjustment
operations.
3.1.10 Write Memory Command (MEM_WR: 1Eh) on page 3-21.
Address
Name
8000 4000h
Description The area where the command codes specifying adjustment operations are written
Name
8000 4002h
Description The area where commands for preparing or starting adjustment operations are written
Description
Command code
Start command
9.2 Information Allocated to Virtual Memory

9.2.3 Adjustment Operation Area

Data Size
Data Type
(Byte)
2 Binary Data
2 Binary Data
9
9-5