Table of Contents
Advertisement
Philips Semiconductors
Volume 1
Table 270: Consolidated Time register 0 (CTIME0 - address 0xE002 4014) bit description
Bit
5:0
7:6
13:8
15:14
20:16
23:21
26:24
31:27
19.4.10 Consolidated Time register 1 (CTIME1 - 0xE002 4018)
The Consolidate Time register 1 contains the Day of Month, Month, and Year values.
Table 271: Consolidated Time register 1 (CTIME1 - address 0xE002 4018) bit description
Bit
4:0
7:5
11:8
15:12
27:16
31:28
19.4.11 Consolidated Time register 2 (CTIME2 - 0xE002 401C)
The Consolidate Time register 2 contains just the Day of Year value.
Table 272: Consolidated Time register 2 (CTIME2 - address 0xE002 401C) bit description
Bit
11:0
31:12
19.4.12 Time counter group
The time value consists of the eight counters shown in
counters can be read or written at the locations shown in
User manual
Symbol
Description
Seconds
Seconds value in the range of 0 to 59
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Minutes
Minutes value in the range of 0 to 59
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Hours
Hours value in the range of 0 to 23
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Day Of Week Day of week value in the range of 0 to 6
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Symbol
Description
Day of Month Day of month value in the range of 1 to 28, 29, 30, or 31
(depending on the month and whether it is a leap year).
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Month
Month value in the range of 1 to 12.
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Year
Year value in the range of 0 to 4095.
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Symbol
Description
Day of Year
Day of year value in the range of 1 to 365 (366 for leap years).
-
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Rev. 01 — 15 August 2005
UM10139
Chapter 19: RTC
Table 273
and
Table
274. These
Table
274.
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Reset
value
NA
NA
NA
NA
NA
NA
NA
NA
Reset
value
NA
NA
NA
NA
NA
NA
Reset
value
NA
NA
280
Advertisement
Table of Contents
