Philips LPC214 Series User Manual page 14

Philips Semiconductors
Volume 1
User manual
2.0 GB
2.0 GB - 12 kB
1.0 GB
(12 kB BOOT BLOCK RE-MAPPED TO HIGHER ADDRESS RANGE)
ACTIVE INTERRUPT VECTORS (FROM FLASH, SRAM, OR BOOT BLOCK)
0.0 GB
Note: Memory regions are not drawn to scale.
Fig 5. Map of lower memory is showing re-mapped and re-mappable areas (LPC2148
with 512 kB Flash)
Rev. 01 — 15 August 2005
12 kB BOOT BLOCK
(RE-MAPPED FROM TOP OF FLASH MEMORY)
(BOOT BLOCK INTERRUPT VECTORS)
RESERVED ADDRESSING SPACE
32 kB ON-CHIP SRAM
(SRAM INTERRUPT VECTORS)
RESERVED ADDRESSING SPACE
512 kB FLASH MEMORY
UM10139
Chapter 2: Memory map
0x8000 0000
0x7FFF FFFF
0x7FFF D000
0x7FFF CFFF
0x4000 8000
0x4000 7FFF
0x4000 0000
0x3FFF FFFF
0x0008 0000
0x0007 FFFF
0x0000 0000
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
14