Philips LPC214 Series User Manual page 13

Philips Semiconductors
Volume 1
Re-mapped memory areas, including the Boot Block and interrupt vectors, continue to
appear in their original location in addition to the re-mapped address.
Details on re-mapping and examples can be found in
control" on page
User manual
2. Minimize the need to for the SRAM and Boot Block vectors to deal with arbitrary
boundaries in the middle of code space.
3. To provide space to store constants for jumping beyond the range of single word
branch instructions.
26.
Rev. 01 — 15 August 2005
UM10139
Chapter 2: Memory map
Section 3.7 "Memory mapping
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
13