Operation - Philips LPC214 Series User Manual

Philips Semiconductors
Volume 1

18.4 Operation

Bits 19:18 of the PINSEL1 register
- 0xE002 C004)" on page
of pin P0.25/AD0.4/AOUT. When these bits are 10, the DAC is powered on and active.
The settling times noted in the description of the BIAS bit are valid for a capacitance load
on the A
cause settling time longer than the specified time.
User manual
77) control whether the DAC is enabled and controlling the state
pin not exceeding 100 pF. A load impedance value greater than that value will
OUT
Rev. 01 — 15 August 2005
(Section 7.4.2 "Pin function Select register 1 (PINSEL1
UM10139
Chapter 18: D/A Converter
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
274