Liquid Bottles And Channels - Thermo Scientific Wellwash User Manual

5. Check that the wash head configuration in the Settings menu corresponds to the installed wash
head.
6. If you are replacing the wash head, you must calibrate the wash head. Refer to "Calibrate current
wash head".
7. If you are changing the wash head to another type, first change the Wash head type and then
calibrate the wash head.

Liquid bottles and channels

The Wellwash includes one standard buffer bottle (2 liters) and one waste bottle (2 liters).
The liquid channels are: A (for Buffer A) and W (for Waste).
The liquid bottles are named and the tubing is color coded to correspond to the correct buffer source
(A = blue and W = colorless) (Figure 12). Refer to "Connection diagram".
Venting holes
Caution!
Caution!
Figure 11. 1x8 wash head properly inserted
Figure 12. Waste and liquid bottles with liquid level sensors
Do not cover the venting holes.
If foaming occurs in the waste bottle, refer to "Foaming".
Sensor cable
14
Intake tube with liquid filter