Section 1 Introduction; Document Overview - ABB 800xA Operation

Document Overview

This user manual describes how to use 800xA for MOD 300 software for MOD 300
system operation. The 800xA System provides a common operation and
configuration view for MOD 300 and other field devices and software options. This
user manual has the following objectives:
•
•
•
Intended User
As a prerequisite you should already be familiar with the MOD 300 control system
you will be working with. In addition, you must have operator privileges on the
computer where the software runs. This user manual is not intended to be the sole
source of instruction for the software. It is highly recommended that those people
who will be involved in system operation attend the applicable training courses
offered by ABB.
The following are some quick guidelines to help you find what you are looking for
in this user manual.
Where to Start
Refer to
software and some basic operations within the 800xA operations framework.
3BUR002418-600 A
How to use 800xA for MOD 300 displays and faceplates.
Operating examples.
Provide additional reference information as necessary.
Section 2, Getting Started

Section 1 Introduction

for instructions on starting 800xA for MOD 300
19