Section 7 I/O Displays
TRIO Displays
The TRIO runtime displays using MOD 300 are described here. For a complete
description of the aspects of TRIO which operators and engineers must understand
to perform their runtime functions, refer to the 800xA for TRIO/Genius,
(3BUR002460*). The types of Remote I/O Displays are:
•
•
Accessing the Remote I/O Displays for a SC Controller
To access the Remote I/O Displays for a SC Controller:
1.
2.
3.
Accessing the Remote I/O Displays for an AC Controller
To access the Remote I/O Displays for an AC Controller:
1.
2.
3BUR002418-600 A
TRIO (Remote I/O) LAN Display which shows the status of a Field Bus and its
attached blocks (up to 30).
TRIO (Remote I/O) Block Display which gives the status, I/O values and
diagnostic messages for one of the TRIO blocks.
Select the desired SC Controller Subsystem and access the Controller
Subsystem Status Display.
To use the Display Request button, select the desired SC Controller, select the
Display Request button and then select the desired TRIO LAN to access the
TRIO LAN Display.
Alternately, you can select a specific Remote I/O in the Diagnostic area to get
the associated TRIO LAN display.
Select the desired AC Controller Subsystem and access the AC460 or AC410
Subsystem Status Display.
Select the desired TRIO LAN submodule to access the TRIO LAN Display.
TRIO Displays
179