ABB 800xA Operation page 229

Appendix A Runtime Templates
Valid entries are:
YES
NO
REVERT COMMAND Field
This field specifies the command to which DEV_CMND is automatically set as part
of revert.
Valid entry is:
CUTOUT ENABLE Field
This field specifies whether cutout is enabled for the loop. Cutout allows an FCM of
this or another loop to control the posting of the alarms.
Valid entry is:
YES
NO
OUTPUT ERROR ACTION Field
This field specifies the actions taken when the output driver fails.
Valid entries are:
NOTHING
GOTO BACKUP
LOOP OFF
3BUR002418-600 A
enable
disable
a command from the descriptor set defined for the device on its Device
Descriptor Templet
enable the cutout feature
disable the cutout feature
continue normal processing
processing goes to the Backup Controller Module if one is
present. This option shuts down CCF processing in a
Multibus subsystem when the driver fails.
turn the loop off
Device Loop Templet
229